-
2.4× Faster than Wi-Fi 6*
Experience ultra-fast connections for all kinds of business
-
Ultra-Low Latency
Enjoy crystal-clear video meetings with reduced latency
-
Higher Device Capacity
Handles high-density environments
-
10G/2.5G Multi-Gig Ports
All APs feature 10G/2.5G ports for Wi-Fi 7's full potential
Omada Wi-Fi 7 Technology: A Significant Upgrade from Wi-Fi 6
The new 6 GHz band offers a larger spectrum and cleaner channels compared to traditional bands, delivering higher capacity, faster connectivity, and less interference.
Multi-Link
Single Link
Wi-Fi 6 devices primarily rely on a single link for data transmission. In contrast, Wi-Fi 7 introduces Multi-Link Operation (MLO), enabling devices to utilize multiple links simultaneously, thereby achieving higher throughput, lower latency, and improved reliability.
With 320 MHz ultra-wide channels, Wi-Fi 7 doubles the bandwidth of Wi-Fi 6's 160 MHz and the number of subcarriers, delivering dramatically higher data transfer rates.
4096-QAM enables each symbol to carry 12 bits instead of 10, increasing theoretical transmission rates by 20% compared to Wi-Fi 6's 1024-QAM. This higher transmission rate boosts data throughput, delivering enhanced speeds and improved network reliability.
Reduced Latency with Multi-RUWi-Fi 6 restricts each user to a single resource unit (RU), limiting spectrum flexibility. Wi-Fi 7 overcomes this limitation by allowing multiple RUs to be allocated to a single user and enabling RU aggregation, improving data throughput and spectral efficiency.
More Efficiency Under Interference with Preamble PuncturingPreamble puncturing identifies and excludes interference-affected subcarriers, reducing spectral waste and boosting efficiency in challenging wireless conditions.
Omada Wi-Fi 7 Delivers Multi-Gig Speeds in Real-World Tests‡
Learn more about the testing diagram>Dedicated Wi-Fi 7 Design Empowers Your Business
Dedicated Spectral Analyzer Radio Enhances Performance and Simplifies Maintenance
-
Real-Time Tri-Band Scanning and Spectral Analysis
-
Over-the-Air Packet Capture
-
Continuous Scanning without Disrupting Data Transmissions
-
Interference Source Identification
*Refer to the below table for supported models
Empowering Businesses with Reliable Omada SDN Solutions
The Omada Wi-Fi 7 access points and 10G/2.5G multi-gigabit PoE switches and gateway combine to provide a real multi-gigabit Wi-Fi solution. Omada’s Software-Defined Networking (SDN) solution enables 100% centralized cloud management for a highly scalable network.
Ceiling Mount
Wi-Fi 7 AP
Wall Plate
Wi-Fi 7 AP
Outdoor
Wi-Fi 7 AP
Switch
Controllers
Controller
Full Wi-Fi 7 Product Portfolio for Indoor and Outdoor Environments
 |
 |
 |
 |
 |
 |
|
|
|
EAP787 High-Performance |
EAP773 |
EAP772 Most Solid |
EAP723 Most Affordable |
EAP772-Outdoor |
EAP725-Wall |
|
Types |
Ceiling Mount |
Ceiling Mount |
Ceiling Mount |
Ceiling Mount |
Outdoor |
Wall Plate |
|
Theoretical Wi-Fi Speeds* |
15 Gbps(US)/ |
11 Gbps (US)/ |
11 Gbps (US)/ |
5.0 Gbps (US)/ |
11 Gbps (US)/ |
5.0 Gbps (US)/ |
|
Spatial Streams |
8 |
6 |
6 |
4 |
6 |
4 |
|
6 GHz Band |
√ |
√ |
√ |
- |
√ |
- |
|
AFC |
√ |
√ |
√ |
- |
√ |
- |
|
Dedicated RF Scanning |
√(may require |
- |
- |
- |
- |
- |
|
Coverage** |
160 m2 (1750 ft2) |
140 m2 (1500 ft2) |
140 m2 (1500 ft2) |
140 m2 (1500 ft2) |
Tri-Band Omni Outdoor 300 m2 (3200 ft2) |
50 m2 (600 ft2) |
|
Concurrent Devices |
380+ |
380+ |
380+ |
250+ |
380+ |
250+ |
|
Weatherproofing |
- |
- |
- |
- |
IP68 |
- |
|
Power Method |
802.3bt PoE++ or |
802.3at PoE+ or |
802.3at PoE+ or |
802.3at PoE+ or |
802.3at PoE+ |
802.3at/bt PoE++*** |
|
Ethernet Ports |
1× 10G |
1× 10G |
1× 2.5G |
1× 2.5G |
1× 2.5G |
2× 2.5G (One Supports PoE Out)***, 2× 1G |
|
Dimensions |
φ8.7×1.5 in |
φ8.7×1.3 in |
φ8.7×1.3 in |
φ6.3×1.3 in |
9.1×8.2×2.8 in |
5.6×3.4×1.6 in |
|
Mounting |
Ceiling; Wall |
Ceiling; Wall |
Ceiling; Wall |
Ceiling; Wall |
Pole; Wall |
Wall |
|
MSRP in the US |
Coming Soon |
$189.99 |
$169.99 |
$84.99 |
$249.99 |
$134.99 |
Note: Prices vary in different countries / regions.
Omada Wi-Fi 7 Typical Application Scenarios
Omada Wi-Fi 7 revolutionizes various environments with high-speed and low-latency capabilities. Powerful internet signals will roll out everywhere you go, keeping everything connected.
Offices
Star Hotels & Resorts & Villas
Smart Retail
Schools
Public Venues
E-Sports Cybercafes & LAN Parties
What Industry Experts Are Saying About Omada & VIGl Unified Solution
†2.4× faster speed is based on the 802.11be specification which specifies the theoretical maximum data rate for a 2×2 device that supports 320 MHz channels, 4K-QAM, and Multi-Link Operation.
‡The peak rate test was conducted in a shielded laboratory environment without an internet connection in 2024. The maximum rate of 12.0 Gbps was based on the combined receive (Rx) and transmit (Tx) data rates, utilizing 2.4 GHz, 5 GHz, and 6 GHz Multi-Link Operation, with 160 MHz bandwidth on the 5 GHz band and 320 MHz bandwidth on the 6 GHz band. The maximum rate of 5.1 Gbps was based on the combined Rx and Tx data rates between the Omada EAP773 and Intel BE220 Wi-Fi card, using 320 MHz bandwidth on the 6 GHz band. EAP773 was chosen for testing with a single terminal, considering that 2×2 MIMO Wi-Fi 7 terminals are the most common type of Wi-Fi 7. Actual speed tests in real-world scenarios are not guaranteed and will vary due to ISP bandwidth, network conditions, client limitations, and environmental factors such as building materials, obstacles, traffic volume and density, and client location.
*Maximum wireless signal rates are the physical rates derived from IEEE Standard 802.11 specifications. The 240 MHz and 160 MHz bandwidth is only available on the 5GHz band. It may be unavailable in some regions/countries due to regulatory restrictions. Actual wireless data throughput, wireless coverage, and connected devices are not guaranteed and will vary as a result of internet service provider factors, network conditions, client limitations, and environmental factors, including building materials, obstacles, volume and density of traffic, and client location.
**Coverage is calculated based on laboratory testing. Actual coverage is not guaranteed and will vary as a result of client limitations and environmental factors.
***One 2.5G port supports PoE out with a power budget of up to 7W when powered by 802.3at PoE and 15.4W when powered by 802.3bt PoE.
12.0 Gbps for Bridging with a Single AP
Omada Wi-Fi 7 AP Networking Diagram
Omada 10G Switch
Test PC1
(with 10G LAN)
Omada EAP783
Omada EAP783
Omada 10G Switch
Test PC2
(with 10G LAN)
12Gbps
Max Bidirectional Throughput
(6 GHz + 5 GHz + 2.4 GHz)
5.1 Gbps for Bridging with a
Single Terminal (Intel BE200 Wi-Fi Card)
Omada Wi-Fi 7 AP and Terminal Networking Diagram
Omada 10G Switch
Test PC
(with 10G LAN)
Omada EAP773
Wi-Fi 7 Terminal
(Laptop with Intel BE200)
5.1Gbps
Max Bidirectional Throughput
(6 GHz )
‡The peak rate test was conducted in a shielded laboratory environment without an internet connection in 2024. The maximum rate of 12.0 Gbps was based on the combined receive (Rx) and transmit (Tx) data rates, utilizing 2.4 GHz, 5 GHz, and 6 GHz Multi-Link Operation, with 160 MHz bandwidth on the 5 GHz band and 320 MHz bandwidth on the 6 GHz band. The maximum rate of 5.1 Gbps was based on the combined Rx and Tx data rates between the Omada EAP773 and Intel BE220 Wi-Fi card, using 320 MHz bandwidth on the 6 GHz band.
EAP773 was chosen for testing with a single terminal, considering that 2×2 MIMO Wi-Fi 7 terminals are the most common type of Wi-Fi 7.
Actual speed tests in real-world scenarios are not guaranteed and will vary due to ISP bandwidth, network conditions, client limitations, and environmental factors such as building materials, obstacles, traffic volume and density, and client location.
